Nano-type lubricant additives fill the domestic gap
The Dalian Institute of Chemical Physics of the Chinese Academy of Sciences and Dalian Beirun Petrochemical Co., Ltd. have cooperated in the development and development of successful nano-type lubricant additives, which have passed the expert appraisal organized by the Dalian Science and Technology Bureau of Liaoning Province. The identification results show that this product has the characteristics of saving fuel and lubricating oil, protecting mechanical parts and equipment, extending mechanical life and enhancing mechanical power, filling the domestic gap.
According to reports, it has been proved by experiments that for ordinary cars, when using ordinary lubricating oil, 8.5 liters of fuel gasoline is consumed per 100 kilometers. Under the same conditions, the lubricating oil produced by this new technology consumes 7.5 liters of fuel gasoline per 100 kilometers. , reduced by more than 11%. Ordinary lubricants have a service life of 5,000 to 7,000 kilometers, and the service life of this new product can exceed 20,000 kilometers. With the frequency of lubricant replacement, 60% of lubricant can be saved. At the same time, the mechanical wear of this product is reduced by more than 43% compared to ordinary lubricating oil.
According to reports, it has been proved by experiments that for ordinary cars, when using ordinary lubricating oil, 8.5 liters of fuel gasoline is consumed per 100 kilometers. Under the same conditions, the lubricating oil produced by this new technology consumes 7.5 liters of fuel gasoline per 100 kilometers. , reduced by more than 11%. Ordinary lubricants have a service life of 5,000 to 7,000 kilometers, and the service life of this new product can exceed 20,000 kilometers. With the frequency of lubricant replacement, 60% of lubricant can be saved. At the same time, the mechanical wear of this product is reduced by more than 43% compared to ordinary lubricating oil.
the Lipstick Tube has magnet function, and it was produced by PC/ABS/PMMA/SAN/PCTA/PP, and we can adjust any color for client during plastic injection. The surface also can be different treatment color. Its size is 23.2*76.8MM, and Surface Treatment is electronic plating. The capacity can be changed at 4.7g, 4,4g, 4.2g by use different inner cup. The molds are existed, so we can produced for client at anytime. And it is good for us to control the quality and timing.
Tube Lipstick,Magnet Function Lipstick Tube,Magnet Function Assembly,Injected Mold Design
DongGuan LongTen package Products Co. Ltd , https://www.longtenpack.com