Last year, the growth of major agricultural machinery exports increased significantly

From the analysis of export categories of major agricultural products in China, the export volume and amount of walking tractors, wheeled tractors and combine harvesters have increased significantly. Customs statistics show that in 2010, the three products exported 114,600, 32,000 and 11,600 respectively, an increase of 38.2%, 36.3% and 23.5% year-on-year. In contrast, sowing, planting and transplanting machinery fell slightly. The annual export volume and amount were 84,900 and US$17.894 million, respectively, down 31.8% and 8.5% year-on-year.

From the month-on-year trend analysis, the export amount of agricultural machinery showed a stable upward trend year-on-year. From the monthly trend analysis of walking tractors, wheeled tractors, combine harvesters and sowing, planting and transplanting machinery in 2010, the walking tractors and wheeled tractors showed relatively moderate fluctuations; combine harvesters and sowing, planting and transplanting Machinery exhibited strong fluctuations. Combine harvesters increased by 338.2% year-on-year in May, showing a rare monthly peak, which fell by 42.8 percentage points year-on-year in March, showing ups and downs; planting, planting and transplanting machinery were similar to those in 3 After a 47.5% drop in the month, there was a sharp increase in July, with an increase of 227%.

From the month-on-month comparison, it showed the characteristics of ups and downs, especially the performance of the combine harvester is the most obvious. Its annual trend is similar to a roller coaster.

From the fundamental analysis, the first half of 2010 was significantly better than the second half. In February and April of the first half of the year, there was a significant decline, with other months showing a relatively large increase. In addition to the sharp rise in August in the second half of the year, most of the other months saw a decline.

Co Extruded Wear Resistant Layer Composite Pipe

Co-extrusion polyolefin elastomers (POE) abrasion resistant inner layer plastic composite pipes is characterised by taking co-extrusion thermoplastic polyolefin elastomers as the abrasion resistant inner layer, using a combination of steel wires (or glass fiber) reinforcements and high-density polyethylene. In addition to good workability and physical and mechanical properties as HDPE pipes, such pipes have good wear resisting performance. Co-extrusion abrasion resistant composite pipeline is a kind of anti-abrasion pipe with high cost-effective performance.

Resistant Layer Composite Pipe,Custom Steel Wire Composite Pipe,Steel Wire Composite Pipe,Co-Extruded Composite Pipe

Shandong Eastern Pipe Co., Ltd. , https://www.dfuhmwpe.com