Jiangling Blasting Equipment Transporter
Product Description Jiangling Blasting Equipment Transporter is also known as blasting equipment transporter, explosives transporter, detonator transporter, explosion-proof vehicle, civilian explosive vehicle, fireworks and firecracker transporter. It is based on the relevant national ministries and commissions on the blasting equipment transport specifications and user requirements and development and production, product line with the National Defense Technology and Industry Commission, "Blasting Equipment Transporter Safety Technical Conditions" requirements. It has the main functions of high strength, fire-retardant, fire-retardant, anti-static spark, fire alarm and burglar alarm. now. Blasting equipment transporter has been separated from the original flat transport, and changed to van transport.
Body composition 1, chassis n chassis models can be divided into: Dongfeng series, Jiangling series, JAC series, Beiqi Aoling series, Beiqi era series, Beiqi Auman series, Qingling series, Liberation series, etc. n chassis can be divided into: dual drive and four drive n According to the rated load quality, there may be 0.5 tons to 9.9 tons (National Commission of Science, Technology and Industry requires the maximum tonnage of the household not to exceed 10 tons). 2. The car body n can be divided into two parts: 1: transport explosives; 2: transport detonators (Anti-riot container); 3: Explosives, detonators transport at the same time (car body must be compartmentalized, sub-warehouse transport, installation of anti-explosive containers). The car body is a double metal skeleton structure, the outside is a cold rolled steel plate, the inner wall is covered with an aluminum alloy plate, and the interlayer is filled with a heat-insulating flame-retardant material. If you need to install the anti-riot container, open the side door. The side wall is equipped with a natural ventilation window with rain protection function to make the air flow inside and outside the box. The interior of the box is anti-static treatment. The bottom of the box and the front of the box are paved. The flame-retardant antistatic rubber sheet is connected with the equipotential of the chassis, and is connected to the ground through the static conductive device at the rear of the vehicle to prevent the generation of static sparks and the timely release of static electricity from the vehicle, thereby improving the safety of the vehicle. The front and side of the car body are equipped with fixed pull rings, and tied goods are used with the binding band to avoid movement and ensure safety. 3. The smoke alarm n is a special device for sensing the fire in the vehicle compartment. It is installed at the top of the vehicle compartment and is connected with the alarm device in the cab. When there is a smoke in the fire, a buzzing alarm in the cab informs the driver. Ensure timely elimination of dangerous situations. 4, anti-theft alarm n In order to ensure safety, open the door in the rear and side of the compartment, installed in the door frame above the magnetic switch alarm (optional anti-theft monitor according to user requirements. Driving recorder, etc.) When the door When it is turned on, the buzzer in the cab sounds an alarm. When not in use, the control switch in the cab can be turned off. This ensures that the vehicle is always in a controlled state during driving. 5. The exhaust system of the vehicle's engine adopts a front-mounted type and an exhaust spark extinguisher (fire shield) is installed to prevent the heat source from adversely affecting the explosives. 6, the chassis is equipped with two electrostatic conductive tape mop, the outside of the car body installation marker marker lights and portable fire extinguishers and other safety devices. 7. The body color is yellow, and there are “No fireworks†and “Blast†words with reflective logos. n The blasting equipment transport vehicle must have the National Development and Reform Commission's announcement qualification, and the design and structure of the blasting equipment transport vehicle must be in full compliance with the documents of the National Defense Science and Technology Industry Committee.
Product Product Specifications Product Name: Jiangling 5040 Blasting Equipment Transporter
Best Selling Cocoa Bean Winnower Machine:
This cocoa winnower is made of full 304 stainless steel.
Our cocoa peeling machine is developed by years experiences. This cocoa peeler machine is the ideal equipment for processing cocoa beans, peanuts, with a high degree of automation, low noise, no pollution and other advantages. You can is adjust the distance of two roller. If distance is long, the final nibs is bigger; if distance is short, the final nibs is smaller.
Structure and working principle:
This machine is composed of peeling rollers, fans, and specific gravity sorting parts, with simple and compact structure, easy operation, stable performance, safety and reliability.
Working principle: Cocoa beans are fed, uniformly fed in the hopper, and peeled by rollers, then the ventilator sucks the peeled skins to the outside of the machine by wind for storage, and the peeled cocoa kernels pass through the material When the material is discharged from the mouth, by adjusting the size of the wind force and the size of the peeling gap, all the peels and kernels can be separated.
Operation:
1. Before operation, check whether the transmission parts are loose, and remove any abnormal noise in time.
2. After the check is normal, turn on the fan first, and then turn on the rubbing roller. The opposite is true when shutting down.
3. Bake or bake the ingredients slightly before rubbing half of the ingredients, just rub the skin off with your fingers.
4. Start the suction fan to adjust the size of the air door of the suction duct according to the wind force, so that the thin skin can be sucked, but the nuts can not be sucked.
5. The size of the raw material particles is different, and the size of the rubbing gap should be adjusted at any time. The gap between the raw material particle size is large, and vice versa.
6. There are two adjusting handles in front of the roller to control the adjustment gap. The gap between forward rotation is large and the gap between reverse rotation is small.
7. After trial rubbing with a small amount of raw materials, adjust the gap after seeing the effect of rubbing the pieces of material
8. After using for a period of time, check whether the transmission parts and circuits are in good condition, and clean the dirt in time to avoid affecting normal use.
Cocoa Peeling Machine,Peeling Machine,Peeling Cutting Machine,Automatic Peeling Machine
Henan Gems Machinery Co.,Ltd , https://www.hngemsmachine.com