Injection Moulding System for Pet Preform China
Model NO.: SZ-950A
Computerized: Computerized
Certification: CE, ISO9001:2008
Clamping Force: 95t
Injection Pressure(PS): 183G
Space Between Tie Bars: 360*360mm
Screw Diameter: 40mm
Max Shot Weight: 160 Tons
Machine Size: 4700*1250*1850mm
PLC Brand: Siemens
Market: Injection Molding Machine Market
After Sales Service: Engineers Available to Service Overseas
Warranty: 12 Months
Trademark: King Machine
Specification: SGS / ISO / CE Approved
Origin: Zhangjiagang Ctiy, China
HS Code: 84771010
Model NO.: SZ-950A
Computerized: Computerized
Certification: CE, ISO9001:2008
Clamping Force: 95t
Injection Pressure(PS): 183G
Space Between Tie Bars: 360*360mm
Screw Diameter: 40mm
Max Shot Weight: 160 Tons
Machine Size: 4700*1250*1850mm
PLC Brand: Siemens
Market: Injection Molding Machine Market
After Sales Service: Engineers Available to Service Overseas
Warranty: 12 Months
Trademark: King Machine
Specification: SGS / ISO / CE Approved
Origin: Zhangjiagang Ctiy, China
HS Code: 84771010
Injection Moulding System for Pet PreformFeatures:
1) LCD computer control with big display screen
2) Hydraulic double proportional valve
3) Hard chrome plated high tensile strength steel tie bars
4) Generous space for fitting large moulds
5) Large opening stroke
6) Two position transducers to control Clamping and Injection
7) Four stages of injecting, independent velocity and pressure control
8) Hydraulic mould height adjustment device
9) Screw cold-start prevention device
10) Melt decompression control
11) Screw back pressure control
12) Multiple hydraulic ejection
13) Differential high speed clamping
14) Centralized lubrication system
15) Low pressure mould protection device
16) Mechanical safety interlock
17) Double electrical safety interlock
18) Oil return filter
19) Oil tank with inner stainless steel container
| Item | Unit | Data | ||
| Max. clamping force | KN | 950 | ||
| Max. opening force | mm | 340 | ||
| Space between tie bars | mm | 360×360 | ||
| Mould height(min-max) | mm | 135-380 | ||
| Max. daylight | mm | 720 | ||
| Ejector force | KN | 25.4 | ||
| Ejector stroke | mm | 85 | ||
| Ejector quantity | 5 | |||
| Screw diameter | mm | 30 | 35 | 40 |
| Screw L/D ratio | L/D | 24.5 | 21 | 18.4 |
| Theoretical shot volume | cm3 | 113 | 154 | 201 |
| Plasticising weight(PS) | g | 103 | 140 | 183 |
| Injection pressure | Mpa | 249 | 183 | 140 |
| Theoretical injection rate(PS) | g | 67.5 | 91.8 | 120 |
| Plasticising capacity(PS) | g/s | 8.3 | 12.5 | 18 |
| Screw torque | N.m | 510 | ||
| Max. screw rotate speed | r/min | 260 | ||
| Injection stroke | mm | 160 | ||
| Pump motor power | KW | 11 | ||
| Pump pressure | Mpa | 16 | ||
| Heating power | KW | 7.3 | ||
| Heating zone | 4 | |||
| Size(L×W×H) | m | 4.25×1.2×1.8 | ||
| Net weight | t | 3.2 | ||
| International designation | 950-280 | |||
Features:
1) LCD computer control with big display screen
2) Hydraulic double proportional valve
3) Hard chrome plated high tensile strength steel tie bars
4) Generous space for fitting large moulds
5) Large opening stroke
6) Two position transducers to control Clamping and Injection
7) Four stages of injecting, independent velocity and pressure control
8) Hydraulic mould height adjustment device
9) Screw cold-start prevention device
10) Melt decompression control
11) Screw back pressure control
12) Multiple hydraulic ejection
13) Differential high speed clamping
14) Centralized lubrication system
15) Low pressure mould protection device
16) Mechanical safety interlock
17) Double electrical safety interlock
18) Oil return filter
19) Oil tank with inner stainless steel container
| Item | Unit | Data | ||
| Max. clamping force | KN | 950 | ||
| Max. opening force | mm | 340 | ||
| Space between tie bars | mm | 360×360 | ||
| Mould height(min-max) | mm | 135-380 | ||
| Max. daylight | mm | 720 | ||
| Ejector force | KN | 25.4 | ||
| Ejector stroke | mm | 85 | ||
| Ejector quantity | 5 | |||
| Screw diameter | mm | 30 | 35 | 40 |
| Screw L/D ratio | L/D | 24.5 | 21 | 18.4 |
| Theoretical shot volume | cm3 | 113 | 154 | 201 |
| Plasticising weight(PS) | g | 103 | 140 | 183 |
| Injection pressure | Mpa | 249 | 183 | 140 |
| Theoretical injection rate(PS) | g | 67.5 | 91.8 | 120 |
| Plasticising capacity(PS) | g/s | 8.3 | 12.5 | 18 |
| Screw torque | N.m | 510 | ||
| Max. screw rotate speed | r/min | 260 | ||
| Injection stroke | mm | 160 | ||
| Pump motor power | KW | 11 | ||
| Pump pressure | Mpa | 16 | ||
| Heating power | KW | 7.3 | ||
| Heating zone | 4 | |||
| Size(L×W×H) | m | 4.25×1.2×1.8 | ||
| Net weight | t | 3.2 | ||
| International designation | 950-280 | |||
Essential Oil Bottles are made of white porcelain bottles made of white porcelain both inside and outside are pearly white and shiny.
These bottles are for beauty uses such as oil blends (essential, carrier, or both), serums, and also for storing industrial and laboratory chemicals. these glass bottles are great for DIY essential oils, colognes, tincture, cosmetics, perfume oils, beard oil, hair oil, or other liquids. The eyedroppers allow for the perfect amount of product to be used every time.
Essential Oil Bottle,Dropper Essential Oil Bottle,Dropper Essential Oil Glass Bottle,Oblique Shoulder Essential Oil Bottle
Linzhou Linhe Glass Technology Co.,Ltd. , https://www.lhglassbottle.com