Industrial robot application maintenance precautions
Before operating the industrial robot must pay attention to check the electrical control box whether there is water, oil into the electrical damp, do not start, and to check the supply voltage is consistent with the front and rear safety door switch is normal. Verify motor rotation direction is the same. Then power; need to be removed when the industrial robot, wherein the injection molding machine to switch off the power supply; turn off the mechanical hand power; turn off the air pressure source robot. m) Except air pressure. Loosen the air cylinder fixing plate fixing screw and move the arm closer to the arch. Move the bumper seat close to the arm. Tighten the pull the cylinder fixing plate, so that the arm can not move.
It is important to note that industrial robots are constantly improving in performance (high speed, high accuracy, high reliability, ease of operation and maintenance), and robotic controller systems are also moving toward the basics of being based on the details of locking the rotating safety screw so that the robot can not rotate, PC-based open-type controller in the direction of development, ease of standardization, networking; device integration increased, the cabinet day by day small, and the modular structure: greatly improving the system reliability, ease of operation and maintenance, to achieve virtual The role of real-world technology in robots has evolved from simulation and rehearsal to manipulating robots for use in process control, such as creating a sense of place for remote robotic operators in a remote work environment.
Dish Dryer,Dryer Stainless Rack,Dish Racks Stainless Steel,Kitchen Dish Racks
Leeyo Pilot Electric Technology Co., Ltd , https://www.nbleeyo-pilot.com