High Quality Alloy Steel Flange with SGS

Precision Alloys have special physical and mechanical properties, and are extensively applied in the key elements and devices of precision motor, electric appliance, instruments and meters, telecommunication equipments, and precision machines.

According to the application and specialties, precision alloys are split into hard magnetic alloy, magnetically soft alloy, elastic alloy, expansion alloy, thermo bimetal, resistance alloy, thermocouple alloy, electric conduction alloy, electric contact alloy, shape memory alloy, superconducting alloy and so on.

1. Description
 
Structure: Flanges
Type: Slip-On,  Neck,  Blind,  Socket  Welding,  Threaded,   Lap  Joint , Plate,  etc
Material: Stainless Steel 304, 304L, 316, 316L
Size: 1/2' ' (DN15) to 48" (DN1200) or according to customer's drawing.
Pressure: Class150,   300,   600,   900  1500  and  2500
Lead Time:  25 days
Packing: pallets, wooden cases or as according to customer's  requirement

Flange
1. Application:
For seal or connect of pipe/tub-e lines
2. Material:
304,304L,316,316L,nickel alloyother material on request
3. Standard:
ANSI,DIN,JIS,BS,EN1092-1
4. Size:
DN15 (1/2") to DN5000 (200")
5. Type:
Threaded Flanges, Socket Welding Flanges, Blind Flanges, Other Flanges

Types' Specification
Welding neck
1, Preferred for high-pressure, subzero or elevated temperature
2, Hub is tapered and bored to match pipe's inside diameter so flow is not restricted, preventing turbulence and reducing erosion
3, Easily radiographed and provides excellent stress distribution
Slip-on
1, Not normally used in high-stress applications due to low hub and weld attachment
2, Silps over outside of pipe
3, Inside of flange welded at hub and end of pipe
Lap joint
1, Used where bolt alignment or access for cleaning is required
2, Similar to slip-on flange when used with lap joint stub end
3, Radius at intersection of flange face and bore to match lap joint stub end
Threaded
1, Used where welding would would be hazardous
2, Designed for low-pressure and non-cyclic applications
3, Bore is threaded to match pipe thread
4, Tapered to seal pipe and flanges
Socket welding
1, For small-diameter chemical processes, hydraulic and stream distribution lines
2, Similar to slip-on flange
3, Counter bore matches pipe bore, allowing unrestricted flow
4, Counter bore from hub side fits pipe's outer diameter -  can insert pipe in socket with fillet weld at hub
Blind
1, Used to close ends of piping
2, Has no bore
3, Permits access to sealed lines
Other flanges
Orifice, Expander, Reducing, Lightweight, Studding Outlets, Long Weld Necks,Metric, Navy Drawings, Customer Drawings
Company Profile:

Test Equipment :

Company strength:

Certificate:
 
Welcome to contact us,thanks

Our products sales all over the world as well. From the following two websites you can also get more information about our company:
http://www.jsxdhj.cn/
http://xingda-alloy.en.made-in-china.com
 
Welcome to contact us,thanks
  Precision Alloys have special physical and mechanical properties, and are extensively applied in the key elements and devices of precision motor, electric appliance, instruments and meters, telecommunication equipments, and precision machines.

According to the application and specialties, precision alloys are split into hard magnetic alloy, magnetically soft alloy, elastic alloy, expansion alloy, thermo bimetal, resistance alloy, thermocouple alloy, electric conduction alloy, electric contact alloy, shape memory alloy, superconducting alloy and so on.

1. Description
 
Structure: Flanges
Type: Slip-On,  Neck,  Blind,  Socket  Welding,  Threaded,   Lap  Joint , Plate,  etc
Material: Stainless Steel 304, 304L, 316, 316L
Size: 1/2' ' (DN15) to 48" (DN1200) or according to customer's drawing.
Pressure: Class150,   300,   600,   900  1500  and  2500
Lead Time:  25 days
Packing: pallets, wooden cases or as according to customer's  requirement

Flange
1. Application:
For seal or connect of pipe/tub-e lines
2. Material:
304,304L,316,316L,nickel alloyother material on request
3. Standard:
ANSI,DIN,JIS,BS,EN1092-1
4. Size:
DN15 (1/2") to DN5000 (200")
5. Type:
Threaded Flanges, Socket Welding Flanges, Blind Flanges, Other Flanges

Types' Specification
Welding neck
1, Preferred for high-pressure, subzero or elevated temperature
2, Hub is tapered and bored to match pipe's inside diameter so flow is not restricted, preventing turbulence and reducing erosion
3, Easily radiographed and provides excellent stress distribution
Slip-on
1, Not normally used in high-stress applications due to low hub and weld attachment
2, Silps over outside of pipe
3, Inside of flange welded at hub and end of pipe
Lap joint
1, Used where bolt alignment or access for cleaning is required
2, Similar to slip-on flange when used with lap joint stub end
3, Radius at intersection of flange face and bore to match lap joint stub end
Threaded
1, Used where welding would would be hazardous
2, Designed for low-pressure and non-cyclic applications
3, Bore is threaded to match pipe thread
4, Tapered to seal pipe and flanges
Socket welding
1, For small-diameter chemical processes, hydraulic and stream distribution lines
2, Similar to slip-on flange
3, Counter bore matches pipe bore, allowing unrestricted flow
4, Counter bore from hub side fits pipe's outer diameter -  can insert pipe in socket with fillet weld at hub
Blind
1, Used to close ends of piping
2, Has no bore
3, Permits access to sealed lines
Other flanges
Orifice, Expander, Reducing, Lightweight, Studding Outlets, Long Weld Necks,Metric, Navy Drawings, Customer Drawings
Company Profile:

Test Equipment :

Company strength:

Certificate:
 
Welcome to contact us,thanks

Our products sales all over the world as well. From the following two websites you can also get more information about our company:
http://www.jsxdhj.cn/
http://xingda-alloy.en.made-in-china.com
 
Welcome to contact us,thanks
 

The feeding and unloading device of machine tool is the automatic or semi automatic mechanical device which takes the workpiece to be sent to the machine tool and the workpiece is removed from the machining position, also known as the automatic loading and unloading device.

Trip	1300*2500*280
Platform size	1380×2750mm
accuracy	The machining accuracy is 0.02, and the repeated positioning accuracy is 0.05mm
The structure of X, y and Z	Z screw, x, y rack
Maximum blank line speed	50000mm/min
Maximum operating speed	25000mm/min
Spindle power	9.0kw
Guide	25 way rail
Spindle speed	0-24000r/min
Operation mode	servo
working voltage	AC380V/50HzAC380V/60Hz
Operation instruction	G code
operating system	SYNTEC system
Net weight	2000kg

 

Upload And Download Woodworking Machine

Upload And Download Woodworking Machine,Cnc Lathe Wood Machine,Mini Cnc Wood Engraving Machine,3D Cnc Wood Engraving Machine

JINAN HT MACHINERY CO.,LTD , http://www.jncncrouter.com