Electric Small Concrete Pump for Building

Electric small concrete pump for building 

Product features:
1.The grouting machine is mainly used for filling insulation materials.
2.Solve the problems of "green", "fire prevention" and "energy conservation".
3. Reduce the weight load of construction materials and greatly reduce manual labor.
4. improve construction efficiency, cost savings advantages.
5. The machine is stable operation, less dust, low noise, easy to clean.
6. suitable for medium and large grouting works.
7.with mixing, grouting joint operation function.
8. wearing parts, long life, low cost accessories.
Features: This product uses spiral feed slurry, vibrating mesh filter cylinder reciprocating operation, fully able to transport a variety of mortar applications. This product has a large displacement, high pressure, provincial labor saving, mobile and flexible features, is an ideal mortar conveying equipment.
(1) The use of pump power is very small, only 11KW, in the absence of power only with a minimum generator can work.
(2) is the smallest concrete pump in China and is the only choice for many narrow construction environments.
(3) pump light weight, easy to move.
(4) pump configuration high, hydraulic operation, stable performance, compact structure, low failure rate, long life.
(5) pump machine affordable, a miniature mortar pump, micro fine stone concrete pump, mini concrete pump three configurations for customers to choose.
(6) The automatic piston air pressure technology, work pressure, pumping distance, pumping height.
 The secondary structural column grouting pump is a kind of concrete pump required by compound pumping. It can be continuously transported to the fine aggregate concrete conveying equipment at the pouring site through horizontal or vertical pipelines. It is widely used in secondary structural column filling and floor heating engineering, Roof, high - rise building walls, reservoirs, hydropower stations, ports, terminals, foundation treatment of weak foundation reinforcement grouting tunnel subway mine backfill grouting bolt support.


Concrete pump performance characteristics:

The use of S-tube distribution valve to meet the small aggregate concrete, mortar pump

 Deformation of the main pump piston pump, the use of high efficiency, strong pressure.

 Hydraulic system with independent three-loop control, high reliability, optical plate and cutting ring with gold, wear-resistant, long life

 Pumping mechanism using dual-piston, advanced performance, good continuity.
 
Structural column pouring special pump PK traditional pouring Construction Technology:
1. The construction work load of one construction column construction equipment is 240 pieces / day (O.18 cubic meters for each pillar), which is equal to the work load of 48 people per day. By comparing the construction of column construction equipment can shorten the filling construction 90% of the construction work cycle, and the daily savings of several thousand dollars of artificial wages. Pouring and stamping structure of concrete column, it is appropriate to use plug-in vibrator, layered tamping.
2, construction column construction equipment can be started by one person operation, but the traditional pouring construction work intensity, so we must always face the lack of construction, recruitment difficulties and other issues. When the wall is attached with a trench, the depth of the embedding column should be greater than the depth of the trench.

Pump Equipment The pump is light weight, equipped with walking wheels, easy to move, unique design, can be placed directly on the floor pouring site, and not subject to pumping height restrictions. Which effectively solves the problem that the top near the bottom beam section is difficult to be cast with high quality during the pouring of the structural column and ensures the flatness and the perception quality of the structural column. It is suitable for conveying fine-grained concrete in superhigh-rise buildings. The columns and pillars in the building floors are constructed with high pumping efficiency and pumping system is 10 times of manual construction, which effectively improves the production efficiency and saves the labor cost. Structure pouring pouring effect: together with the ring beam to form a closed space skeleton to strengthen the wall bending, shear capacity. Can increase the overall rigidity and stability of the building.



main parameter :
 
column pump injection pump purposes:
  Application in the high-rise building mortar and fine aggregate concrete transportation, secondary structural column filling, reservoirs, hydropower stations, ports, piers in a variety of pressure grouting, foundation treatment, weak foundation, grouting, tunnels, subway construction, backfilling Grouting bolt support, warm concrete projects in the fine-grained concrete filled layer or mortar filled layer of large-scale, high-efficiency construction













  Electric small concrete pump for building 

Product features:
1.The grouting machine is mainly used for filling insulation materials.
2.Solve the problems of "green", "fire prevention" and "energy conservation".
3. Reduce the weight load of construction materials and greatly reduce manual labor.
4. improve construction efficiency, cost savings advantages.
5. The machine is stable operation, less dust, low noise, easy to clean.
6. suitable for medium and large grouting works.
7.with mixing, grouting joint operation function.
8. wearing parts, long life, low cost accessories.
Features: This product uses spiral feed slurry, vibrating mesh filter cylinder reciprocating operation, fully able to transport a variety of mortar applications. This product has a large displacement, high pressure, provincial labor saving, mobile and flexible features, is an ideal mortar conveying equipment.
(1) The use of pump power is very small, only 11KW, in the absence of power only with a minimum generator can work.
(2) is the smallest concrete pump in China and is the only choice for many narrow construction environments.
(3) pump light weight, easy to move.
(4) pump configuration high, hydraulic operation, stable performance, compact structure, low failure rate, long life.
(5) pump machine affordable, a miniature mortar pump, micro fine stone concrete pump, mini concrete pump three configurations for customers to choose.
(6) The automatic piston air pressure technology, work pressure, pumping distance, pumping height.
 The secondary structural column grouting pump is a kind of concrete pump required by compound pumping. It can be continuously transported to the fine aggregate concrete conveying equipment at the pouring site through horizontal or vertical pipelines. It is widely used in secondary structural column filling and floor heating engineering, Roof, high - rise building walls, reservoirs, hydropower stations, ports, terminals, foundation treatment of weak foundation reinforcement grouting tunnel subway mine backfill grouting bolt support.


Concrete pump performance characteristics:

The use of S-tube distribution valve to meet the small aggregate concrete, mortar pump

 Deformation of the main pump piston pump, the use of high efficiency, strong pressure.

 Hydraulic system with independent three-loop control, high reliability, optical plate and cutting ring with gold, wear-resistant, long life

 Pumping mechanism using dual-piston, advanced performance, good continuity.
 
Structural column pouring special pump PK traditional pouring Construction Technology:
1. The construction work load of one construction column construction equipment is 240 pieces / day (O.18 cubic meters for each pillar), which is equal to the work load of 48 people per day. By comparing the construction of column construction equipment can shorten the filling construction 90% of the construction work cycle, and the daily savings of several thousand dollars of artificial wages. Pouring and stamping structure of concrete column, it is appropriate to use plug-in vibrator, layered tamping.
2, construction column construction equipment can be started by one person operation, but the traditional pouring construction work intensity, so we must always face the lack of construction, recruitment difficulties and other issues. When the wall is attached with a trench, the depth of the embedding column should be greater than the depth of the trench.

Pump Equipment The pump is light weight, equipped with walking wheels, easy to move, unique design, can be placed directly on the floor pouring site, and not subject to pumping height restrictions. Which effectively solves the problem that the top near the bottom beam section is difficult to be cast with high quality during the pouring of the structural column and ensures the flatness and the perception quality of the structural column. It is suitable for conveying fine-grained concrete in superhigh-rise buildings. The columns and pillars in the building floors are constructed with high pumping efficiency and pumping system is 10 times of manual construction, which effectively improves the production efficiency and saves the labor cost. Structure pouring pouring effect: together with the ring beam to form a closed space skeleton to strengthen the wall bending, shear capacity. Can increase the overall rigidity and stability of the building.



main parameter :
 
column pump injection pump purposes:
  Application in the high-rise building mortar and fine aggregate concrete transportation, secondary structural column filling, reservoirs, hydropower stations, ports, piers in a variety of pressure grouting, foundation treatment, weak foundation, grouting, tunnels, subway construction, backfilling Grouting bolt support, warm concrete projects in the fine-grained concrete filled layer or mortar filled layer of large-scale, high-efficiency construction













 

Plastic Pipe Vacuum Calibration Tank

The Molten Extrudate in The Extruder Is Drawn into The First Vacuum Chamber Through Calibration

The Vacuum Then Forces the Plastic Against the Calibration Tool While Cooling Its Surface Enough to Maintain Proper Dimensions. Cooling Water Enters the Chamber Through the Spray Bar.

The Calibrated Plastic Is Pulled Through a Second Vacuum Tank, Where It Is Cooled by Water Filling the Compartment. A Vacuum Can Be Applied to The Chamber to Help Maintain the Shape of The Plastic Product.

Depending On the Size of The Pipe, The Cooling System of The Vacuum Sizing Machine Can Be Cooled by Spray Cooling. Generally, Full Immersion Is Required When the Pipe Diameter Is Small, And Spray Cooling Is Appropriate When the Pipe Diameter Is Large.

After Cooling, The Plastic Product Passes Through the Final Chamber. The Rollers Help Guide the Plastic Through the Vacuum Setting Machine.

Plastic Vacuum Calibration Tank,Vacuum Tank,Plastic Pipe Calibrator

Zhangjiagang Polestar Machinery Co.,Ltd , https://www.polestarplast.com