• Posted on

Boilers and Cooling Towers Water Softener Plant System

Model NO.: YL-II-6
Relative Humidity: Less Than 95%(25centigrade)
Hardness of Raw Water: Less Than 8mmol/L
Hardness of Effluent: Less Than 0.03mmol/L
Inlet Water Pressure: 0.2 to 0.4MPa
Free Chlorine: Less Than 0.3mg/L
Suspended Solid: Less Than 0.5mg/L
Iron Content: Less Than 0.3mg/L
Trademark: YLD
Specification: CE, GSG
Origin: Jiangyin, Jiangsu, China
HS Code: 8421219990
Model NO.: YL-II-6
Relative Humidity: Less Than 95%(25centigrade)
Hardness of Raw Water: Less Than 8mmol/L
Hardness of Effluent: Less Than 0.03mmol/L
Inlet Water Pressure: 0.2 to 0.4MPa
Free Chlorine: Less Than 0.3mg/L
Suspended Solid: Less Than 0.5mg/L
Iron Content: Less Than 0.3mg/L
Trademark: YLD
Specification: CE, GSG
Origin: Jiangyin, Jiangsu, China
HS Code: 8421219990

Boilers and Cooling towers Water Softener Plant  system


Water Softening is a process of removing Calcium and Magnesium ions from water. Calcium and Magnesium are the hardness forming component of water. When hard water is passed through resin in Sodium form, Ca and Mg ions are exchanged for equivalent Na ions. The water which now contains only Sodium ions is called soft water. The soft water is then used as a feed water to low and medium pressure boiler, RO systems and also for Laundries and other application.



Specification :
§ Material of construction MS/FRP/MSRL/SS.
§ Designed as per ASME.
§ Well designed distribution system.
§ Well designed collection system.
§ High end water quality.
§ Suited regeneration time for various application.
§ High replacement of calcium and magnesium.




Application
 
§ Industrial Process Water.
§ Hospitals & Laundries.
§ Automobiles industries.
§ Domestic application.
§ Pre treatment of water.
§ Boilers and Cooling towers.


What do water softeners do?
Industrial water softeners are specific ion exchangers that are designed to remove ions which are positively charged.
Softeners mainly remove calcium (Ca2+) and magnesium (Mg2+) ions. Calcium and magnesium are often referred to as "hardness minerals". Softeners are sometimes even applied to remove iron. 
The softening devices are able to remove up to five milligrams per liter (5 mg/L) of dissolved iron and can operate automatic, semi-automatic, or manual. Each type is rated on the amount of hardness it can remove before regeneration is necessary. Commercial water softeners collect hardness minerals within its conditioning tank and from time to time flushes them away to drain.
When an ion exchanger is applied for water softening, it will replace the calcium and magnesium ions in the water with other ions, for instance sodium or potassium. The exchanger ions are added to the ion exchanger reservoir as sodium and potassium salts (NaCl and KCl). 





Technical parameters:

Category Model Recommended
water yield
(M³/h)		 Tank size
Diameter *Height(mm)		 Salt box
(L)		 Amount of resin(KG)
Dual-valve and
dual-tank (simultaneous
operation and respective
regeneration)		 YL-II-36 24-36 900×1900 800 1040
YL-II-50 36-50 1000×2200 1000 1440
YL-II-70 50-70 1200×2400 1500 2000
YL-II-100 70-100 1500×2500 2000 3200

Dual-valve and
dual-tank(One for
use and the other for standby)		 YL-II-1 1 250×1400 60 80
YL-II-2 2 300×1400 100 120
YL-II-3 3 350×1400 100 160
YL-II-4 4 400×1650 200 240
YL-II-5 5 500×1750 300 360
YL-II-6 6 600×1900 350 480
YL-II-10 8-10 750×1900 500 720
YL-II-18 12-18 900×1900 800 1040
YL-II-25 18-25 1000×2200 1000 1440
YL-II-35 25-35 1200×2400 1500 2000
YL-II-50 35-50 1500×2500 2000 3200


Boilers and Cooling towers Water Softener Plant  system


Water Softening is a process of removing Calcium and Magnesium ions from water. Calcium and Magnesium are the hardness forming component of water. When hard water is passed through resin in Sodium form, Ca and Mg ions are exchanged for equivalent Na ions. The water which now contains only Sodium ions is called soft water. The soft water is then used as a feed water to low and medium pressure boiler, RO systems and also for Laundries and other application.



Specification :
§ Material of construction MS/FRP/MSRL/SS.
§ Designed as per ASME.
§ Well designed distribution system.
§ Well designed collection system.
§ High end water quality.
§ Suited regeneration time for various application.
§ High replacement of calcium and magnesium.




Application
 
§ Industrial Process Water.
§ Hospitals & Laundries.
§ Automobiles industries.
§ Domestic application.
§ Pre treatment of water.
§ Boilers and Cooling towers.


What do water softeners do?
Industrial water softeners are specific ion exchangers that are designed to remove ions which are positively charged.
Softeners mainly remove calcium (Ca2+) and magnesium (Mg2+) ions. Calcium and magnesium are often referred to as "hardness minerals". Softeners are sometimes even applied to remove iron. 
The softening devices are able to remove up to five milligrams per liter (5 mg/L) of dissolved iron and can operate automatic, semi-automatic, or manual. Each type is rated on the amount of hardness it can remove before regeneration is necessary. Commercial water softeners collect hardness minerals within its conditioning tank and from time to time flushes them away to drain.
When an ion exchanger is applied for water softening, it will replace the calcium and magnesium ions in the water with other ions, for instance sodium or potassium. The exchanger ions are added to the ion exchanger reservoir as sodium and potassium salts (NaCl and KCl). 





Technical parameters:

Category Model Recommended
water yield
(M³/h)		 Tank size
Diameter *Height(mm)		 Salt box
(L)		 Amount of resin(KG)
Dual-valve and
dual-tank (simultaneous
operation and respective
regeneration)		 YL-II-36 24-36 900×1900 800 1040
YL-II-50 36-50 1000×2200 1000 1440
YL-II-70 50-70 1200×2400 1500 2000
YL-II-100 70-100 1500×2500 2000 3200

Dual-valve and
dual-tank(One for
use and the other for standby)		 YL-II-1 1 250×1400 60 80
YL-II-2 2 300×1400 100 120
YL-II-3 3 350×1400 100 160
YL-II-4 4 400×1650 200 240
YL-II-5 5 500×1750 300 360
YL-II-6 6 600×1900 350 480
YL-II-10 8-10 750×1900 500 720
YL-II-18 12-18 900×1900 800 1040
YL-II-25 18-25 1000×2200 1000 1440
YL-II-35 25-35 1200×2400 1500 2000
YL-II-50 35-50 1500×2500 2000 3200

Stainless Steel GB Standard Pipe

Stainless Steel,Stainless Steel Tube,Steel

En Standard Pipe Thermal Insulation Pipe Co., Ltd. , http://www.chastainless.com